Powerbank Function
To access the torches powerbank function cycle the tail-cap switch until the green map reading LED is illuminated, then depress the tail-cap switch twice in quick succession. The tail-cap light will flash green indicating the powerbank function is switched on and operating.
1) Plug the USB plug into the charging port of the device to be charged.
2) Plug the USB plug into the USB outlet (A) on the side of the torch.
3) Changing will commence as soon as the USB lead is connected, check the torch is switched off, to ensure the recharge time is kept to a minimum.
4) Once the attached device is fully charged disconnect the charging lead to conserve the remaining battery power stored in the torch.
NOTE: The Focus 800 can be used to recharge any device which has been supplied with a USB charging lead by its manufacturer. Lighthouse cannot be held responsible for any damage or accident caused to any device which is charged using the Focus 800 as a power source. Please note some mobile devices charging leads can contain authentication chips to prevent the use of third party chargers with their products.
Specifications:
Light Source: High-performance LED.
Brightness: 800/240 lumens.
Run Time: 3/8 hours.
Beam Distance: 100m.
Power: Rechargeable 3.7V 2600mAh.
Charge Time: 5 hours.
Water Resistant: IP54.
Dimensions: 154 x 37/31.8mm.
Weight: 157g (exc batteries).