Page 118 - Industrial Ancillaries 2020 Catalogue (Sterling)

02
Gates Form & Seal System
Body DIN 2353, ISO 8434-1
Function Ring with Reshaped tube, standard hydraulic tube vulcanized soft seal steel or stainless steel
EMB-FS® tube-reshaping DIN 2353 tube ttings
Nut DIN 2353, ISO 8434-1
u Standard parts according to DIN 2353 / ISO 8434-1
u High nominal pressures
u Low assembly power
u Approved for safety areas
Product Range and Materials
The EMB-FS® System provides the user with a reshaping system with the entire size spectrum of standard DIN 2353,
ISO 8434-1 tube ttings.
• Full product range from
6 mm to 42 mm tube OD
• Use of all common materials, steeltubes St 37.4, stainless steel tubes 1.4571, zinc-chrome plated tubes and also special materials.
Technical Data
Width x Depth x Height Weight
Power Supply Frequency
Fuse
Cost and Time Savings
The speci cations required
of a tube forming system in terms of cost and time saving on the basis of DIN 2353 / ISO 8434-1 ttings are thus consistently ful lled by EMB-FS®.
Signi cant cost savings due to reduction of the system / process costs.
• Does not require special tube preparation or nishing. • Less single parts
703 mm x 720 mm x 335 mm 145 kg
400 V
50 Hz
16 A
Easy Assembly and High Performance during Operation
The nal assembly of the
tube in the connection
body is done with the
support of the function
ring, which integrates an elastomer ne seal into the system and at the same
time guarantees protection against excessive tightening by acting as an assembly limit.
• Frictional tension of
tube and tting cone
with metallic sealfunction.
• The vulcanised soft seal guarantees leak-free performance in high pressure working conditions.
• Secure assembly by evident signalised assembly stop.
Economically Reshaping with the EMB-FS® Electronically Controlled Forming Machine
The standard hydraulic pipe in steel or stainless steel is formed in one step with the electronic power path controlled FS-forming machine
• Tube size selection can
be performed quickly and simply via the machine display. • The integrated power
path control allows to
process different materials, normal steel or stainless steel and also different tube wall thickness with one tool
set.
• Tools can be changed very quickly and easily with the use of bayonet catch.
• Save of setup time and
tool cost
118
Hydraulics