Industrial Ancillaries Products Company Profile Ordering Contact Us Home Search Site Map
Ham-Let Compression
 Fittings & Valves 		Carbon Steel
 Compression Fittings		 Wade Compression
 Fittings & Valves		 Airline Equipment
 & Accessories		 Tubing and
 Accessories		 Brass Fittings
 & Adaptors
Valves
 		 Malleable Iron Pipe
 Fittings & Accessories		 316 Stainless Steel
Screwed Fittings		 Maintenance
& Accessories 		Polyethylene Pipe
& Compression Fittings		 Plumbing, Tools
 & Safety Equipment
 
Search

Maintenance & Accessories

ROCOL® Ultracut™ -
Technically Advanced Metal Cutting & Grinding Fluids
 
Logo: ROCOL® Ultracut™
 

Ultracut 200 Series - Soluble Oil Fluids

Soluble oil metalworking fluids have a high mineral oil content and form milky white emulsions. They leave a light oily protective film on machine tools/components and are primarily used for cutting operations.

Ultracut 300 Series - Semi-Synthetic Fluids

Semi-synthetic metalworking fluids have a medium mineral oil content, form a semi-translucent emulsion and can be used to rationalise to one fluid for cutting and grinding applications.

Ultracut 500 Series - Neat Oil Fluids

Neat oil metalworking fluids are formulated from severely refined mineral oil and are used for the most demanding cutting operations.

Ultracut 620 - Chlorine Free Fluid

Long life chlorine free EP semi-synthetic cutting fluid.
 
 
Ultracut 250 Plus
Soluble Oil Fluid
Product Group: 361
ROCOL® Ultracut 250 Plus
• Long life soluble oil cutting fluid
• For light / medium cutting operations
• High quality general purpose water mix cutting fluid
• Suitable for ferrous and non-ferrous metals
• Long sump life - cost efficient
• Refined mineral oils give a high degree of residual corrosion protection and lubricity during machining
• Low foaming
• Recommended dilution between 20:1 and 40:1 in water
 
Part No Type  
ROCOL-51366 5 litre  
ROCOL-51363 20 litre  
ROCOL-51362 60 litre  
 
 
Ultracut 250 HW
Soluble Oil Cutting Fluid
Product Group: 361
ROCOL® Ultracut 250 HW Soluble Oil Cutting Fluid
• Long life soluble oil cutting fluid
• For companies operating in areas with water hardness greater than 250ppm
• For light / medium cutting operations
• High quality general purpose water mix cutting fluid
• Suitable for ferrous and non-ferrous metals
• Long sump life - cost efficient
• Refined mineral oils give a high degree of residual corrosion protection and lubricity during machining
• Low foaming
• Recommended dilution between 20:1 and 40:1 in water
 
Part No Type  
ROCOL-51483 20 litre  
 
 
Ultracut 255
EP Soluble Oil Cutting Fluid
Product Group: 361
ROCOL® Ultracut 255 EP Oil Soluble Cutting Fluid
• Long life EP soluble oil cutting fluid
• For medium / severe cutting operations
• Contains EP additives to give superior performance and extend tool life
• Long sump life - cost efficient
• Refined mineral oils give a high degree of residual corrosion protection and lubricity during machining
• Low foaming
• Recommended dilution 20:1 and 40:1 in water
 
Part No Type  
ROCOL-51336 5 litre  
ROCOL-51333 20 litre  
 
 
 
 
Ultracut 255 HW
EP Soluble Oil Cutting Fluid
Product Group: 361
ROCOL® Ultracut 225 HW EP Soluble Oil Cutting Fluid
• Long life EP soluble oil cutting fluid
• For companies operating in areas with water hardness greater than 250ppm
• For medium / severe cutting operations
• Contains EP additives to give superior performance and extend tool life
• Long sump life - cost efficient
• Refined mineral oils give a high degree of residual corrosion protection and lubricity during machining
• Low foaming
• Recommended dilution 20:1 and 40:1 in water
 
Part No Type  
ROCOL-51473 20 litre  
 
 
Ultracut 260
EP Soluble Oil Cutting Fluid
Product Group: 361
ROCOL® Ultracut 260 EP Soluble Cutting Fluid
• Long life high performance EP soluble oil cutting fluid
• Provides superior performance in severe cutting operations
• Suitable for a wide range of ferrous metals including difficult to machine alloys, stainless steel, nickel alloys and titanium
• Contains EP additives to give superior performance and extend tool life
• Long sump life - cost efficient
• Refined mineral oils give a high degree of residual corrosion protection and lubricity during machining
• Low foaming
• Dilution between 20:1 and 40:1 in water
 
Part No Type  
ROCOL-51263 20 litre  
ROCOL-51264 60 litre  
 
 
Ultracut 280A Plus
Soluble Oil Cutting Fluid for Aluminium
Product Group: 361
ROCOL® Ultracut 280A Plus Soluble Oil Cutting Fluid
• Long life high performance soluble oil cutting fluid for aluminium
• Compatible with most grades of aluminium and its alloys
• Helps prevent built-up edge
• Long sump life - cost efficient
• Refined mineral oils give a high degree of residual corrosion protection and lubricity during machining
• Low foaming
• Recommended dilution between 15:1 and 25:1 in water
 
Part No Type  
ROCOL-51682 20 litre  
ROCOL-51681 60 litre  
 
 
Ultracut 280A HW
Hard Water Soluble Oil Cutting Fluid for Aluminium
Product Group: 361
ROCOL® Ultracut 280A HW Hard Water Soluble Oil Cutting Fluid
• Long life high performance soluble oil cutting fluid for aluminium
• For companies operating in areas with water hardness more than 250ppm
• Compatible with most grades of aluminium and its alloys
• Helps prevent built-up edge
• Long sump life - cost efficient
• Refined mineral oils give a high degree of residual corrosion protection and lubricity during machining
• Low foaming
• Recommended dilution between 15:1 and 25:1 in water
 
Part No Type  
ROCOL-51493 20 litre  
 
 
 
Ask for a Discount
Contact Industrial Ancillaries Ltd now on the number below to ask a member of our Sales Team about prices for ROCOL® Ultracut - Technically Advanced Metal Cutting and Grinding Fluids.
Lines open 8.30am - 5.30pm GMT Monday to Friday and 8.30am - 12pm GMT Saturday.
 
Home | Profile | Products | Ordering | Contact Us | Search | Site Map
 
 
Contact Industrial Ancillaries Ltd
Industrial Ancillaries Ltd, Harper Way, Markham Vale, Chesterfield, Derbyshire UK, S44 5JX
 
 
Copyright © Industrial Ancillaries Ltd 2010