Ham-Let Compression Fittings & Valves	Carbon Steel Compression Fittings	Wade Compression Fittings & Valves	Airline Equipment & Accessories	Tubing and Accessories	Brass Fittings & Adaptors
Valves	Malleable Iron Pipe Fittings & Accessories	316 Stainless Steel Screwed Fittings	Maintenance & Accessories	Polyethylene Pipe & Compression Fittings	Plumbing, Tools & Safety Equipment

Hydraulics

Donaldson Hydraulic Reservoir Filtration Accessories

Suction Strainers

Strainers remove larger particulate from fluid reservoirs, sumps and similar applications, filtering large debris before it enters the hydraulic system. Strainers are used for filtering petroleum-based hydraulic fluids, phosphate esters, water glycols, lubricating oils, coolants, fuels and water.

Donaldson suction strainers are zinc-plated, with stainless steel pleated mesh screens and rugged steel core centres epoxy bonded to heavy gauge connector and end caps. They are cleanable and reusable. Clean by swishing in non-caustic solvent, then blow dry from inner diameter to outer diameter with compressed air.

Suction Strainer

With Metal End Cap

• In-line threaded style suction strainer

Part No.	Size	Flow Rate	Media Rating (µm)	Media
P171861	3/8 BSPP	10 LPM	90	Wire Mesh
P171862	3/8 BSPP	5 LPM	30 Nominal	Cellulose
P171863	3/8 BSPP	10 LPM	60	Wire Mesh
P171865	1/2 BSPP	17 LPM	90	Wire Mesh
P171866	1/2 BSPP	9 LPM	30 Nominal	Cellulose
P171867	1/2 BSPP	17 LPM	60	Wire Mesh
P171869	3/4 BSPP	25 LPM	90	Wire Mesh
P171870	3/4 BSPP	13 LPM	30 Nominal	Cellulose
P171871	3/4 BSPP	25 LPM	60	Wire Mesh
P171877	1 BSPP	45 LPM	90	Wire Mesh
P171878	1 BSPP	25 LPM	30 Nominal	Cellulose
P171879	1 BSPP	45 LPM	60	Wire Mesh
P177420	1 BSPP	50 LPM	250	Wire Mesh
P171886	1 1/4 BSPP	35 LPM	30 Nominal	Cellulose
P171887	1 1/4 BSPP	65 LPM	60	Wire Mesh
P171885	1 1/4 BSPP	65 LPM	90	Wire Mesh
P760321	1 1/4 BSPP	90 LPM	250	Wire Mesh
P172453	1 1/2 BSPP	50 LPM	30 Nominal	Cellulose
P172454	1 1/2 BSPP	90 LPM	60	Wire Mesh
P172452	1 1/2 BSPP	90 LPM	90	Wire Mesh
P171902	2 BSPP	120 LPM	30 Nominal	Cellulose
P171903	2 BSPP	250 LPM	60	Wire Mesh
P171901	2 BSPP	250 LPM	90	Wire Mesh
P171907	2 1/2 BSPP	300 LPM	60	Wire Mesh
P171905	2 1/2 BSPP	300 LPM	90	Wire Mesh
P171911	3 BSPP	400 LPM	60	Wire Mesh
P171909	3 BSPP	400 LPM	90	Wire Mesh

Fluid Level & Temperature Gauges

To facilitate accurate monitoring of the oil level in tanks and reservoirs. Fluid Level and Temperature Gauges indicate oil level and temperature, 35°F to 210°F (30°C to 90°C). Fluid Level Gauges indicate oil level only.

Fluid Level Gauge

Metric connection

• Transparent lens is protected by metal bar with BunaN seals

• Suitable for lubricants, mineral, petroleum and water based fluids

• 180° visibility of fluid level

• Maximum working pressure for all models is 14.5 PSI / 1 BAR / 100 kPa for pressurised tanks

• Suggested mounting hole diameter: 11mm or 13mm

• Recommended bolt tightening torque is 10lbs-ft, with inside nut for tightening directly on the tank

Part No.	Thread	Size
P171913	M10	76mm
P171914	M12	76mm
P171917	M10	127mm
P171918	M12	127mm
P171921	M12	254mm

Donaldson Fluid Level and Temperature Gauge

Fluid Level & Temperature Gauge

Metric connection

• Fluid level gauge with built in thermometer

Part No.	Thread	Size
P171915	M10	76mm
P171916	M12	76mm
P171919	M10	127mm
P171920	M12	127mm
P171922	M12	254mm

Contact Industrial Ancillaries Ltd now on the number below to ask a member of our Sales Team about prices for Donaldson Hydraulic Reservoir Suction Strainers and Fluid Level & Temperature Gauges displayed on this website.
Lines open 8.30am - 5.30pm GMT Monday to Friday and 8.30am - 12pm GMT Saturday.

Industrial Ancillaries Ltd, Harper Way, Markham Vale, Chesterfield, Derbyshire UK, S44 5JX