Ham-Let Compression Fittings & Valves	Carbon Steel Compression Fittings	Wade Compression Fittings & Valves	Airline Equipment & Accessories	Tubing and Accessories	Brass Fittings & Adaptors
Valves	Malleable Iron Pipe Fittings & Accessories	316 Stainless Steel Screwed Fittings	Maintenance & Accessories	Polyethylene Pipe & Compression Fittings	Plumbing, Tools & Safety Equipment

Plumbing, Tools & Safety Equipment

John Guest Speedfit® Tap Connectors

Product Group: 308




• Manufactured to BS EN ISO 9001 • Water Regulations Advisory Scheme (WRAS) and British Board of Agrément (BBA) Approved • Speedfit® PEM Fittings and Speedfit® Barrier Pipe are kitemarked to BS7291 Part 1, 2 and 3, Class S (Licence No KM39767) Applications: • Mains fed and indirect cold water systems • Vented and unvented hot water systems • Vented and sealed central heating systems Can be used with: • Copper pipe to BS EN 1057 • Speedfit® Barrier Pipe to BS 7291 Maximum Working Temperatures and Pressures: • Cold Water (indirect and direct mains) — 20°C, 12 BAR • Central Heating — 105°C (short term malfunction at 114°C), 3 BAR • Hot Water (including unvented cylinders) — 95°C, 6 BAR Please note: • Speedfit® fittings cannot be used on stainless steel pipe DO NOT USE FOR Gas, Fuel Oil or Compressed Air applications.


Speedfit® Tap Connectors • John Guest manufacture a wide range of Speedfit® connectors including conventional straight and bent tap connectors • The range also offers a special and unique Tap Connector that only requires a simple hand tightening to connect up a terminal tap, mixer or a float valve • An integral seal within the fitting avoids the need for further sealant • The connectors are useful when replacing existing brassware or in other confined spaces • Coupling up to a supply is easy — the pipe is simply pushed home into the Speedfit® connection and is instantly secured, without the need for specialist tools


Speedfit® Stem Tee

Suitable for Central Heating Systems

Part No	Size (mm)
PEM0410W	10
PEM0415W	15
PEM0422W	22
PEM0428W	28

Product Group: 308


Speedfit® Female Coupling / Tap Connector

Suitable for Central Heating Systems • Requires hand tightening only

Part No	OD (mm)	BSP
PSE3210W	10	1/2
PSE3201W	15	1/2
PSE3203W	15	3/4
PSE3202W	22	3/4

Product Group: 308

Please note: Plastic threads are generally not as strong as metal threads. Maximum Torque for 1/2 BSP Speedfit® plastic threads is 3.0 Nm and for 3/4 BSP threads it is 4.0 Nm.


Speedfit® Straight Tap Connector with Brass Swivel Nut and Sealing Washer

Suitable for Central Heating Systems

Part No	OD (mm)	BSP
PEMSTC1514	15	1/2
PEMSTC1516	15	3/4
PEMSTC2216	22	3/4

Product Group: 308


Speedfit® Bent Tap Connector with Brass Swivel Nut and Sealing Washer

Suitable for Central Heating Systems

Part No	OD (mm)	BSP
PEMBTC1514	15	1/2

Product Group: 308

Speedfit® Tank Connector

• Requires hand tightening only • Designed for tanks with a maximum wall thickness of 4mm

Part No	Pipe OD (mm)
TCF15PF	15
TC22PF	22

Product Group: 308


Speedfit® Stop End

Suitable for Central Heating Systems The unique feature of the "Speedfit® Concept", the ability to disconnect the fitting should you want to, means the Speedfit® Stop End not only provides a permanent leakproof seal, but can be readily removed to allow work to restart or to allow an extension to a system. The fitting is especially useful to allow water to be turned back on, overnight for instance, or if a job has to be interrupted for another reason.

Part No	Size (mm)
PSE4610W	10
PSE4615W	15
PSE4622W	22

Product Group: 308


Speedfit® Reducer

• Cold water only

Part No	Size (mm)
PEM061510W	15 x 10
PEM062215W	22 x 15
PEM062815W	28 x 15
PEM062822W	28 x 22

Product Group: 308


Speedfit® Plug

Suitable for Central Heating Systems

Part No	OD(mm)
PL10	10
PL15	15
PL22-JG	22
PL28	28

Product Group: 308


Speedfit® Radiator Outlet Plate

• Creates a neat outlet for 10mm supply pipes to a radiator • To be used with single gang 25mm steel KO boxes to BS 4662, fitted with rubber gromet

Part No
JG-ROP

Contact Industrial Ancillaries Ltd now on the number below to ask a member of our Sales Team about prices for John Guest Speedfit® Tap Connectors. .
Lines open 8.30am - 5.30pm GMT Monday to Friday and 8.30am - 12pm GMT Saturday.

Industrial Ancillaries Ltd, Harper Way, Markham Vale, Chesterfield, Derbyshire UK, S44 5JX