Wade Brass Compression Fittings and Valves

Wade Compression Fittings

Wade brass compression fittings consistently produce cost-effective, reliable leak tight joints. They can be found in general use throughout the following industries:- hydraulic, pneumatic, automotive, locomotive, LPG, oil and gas, power generation, air conditioning, heating and ventilation.

Wade couplings are also used for applications where there is the need for added safety provided by an engineering fitting.

Wade compression fittings, depending on the ferrule type, are suitable for use with copper, brass, bundy, nylon, polythene and PVC coated copper tube and are available in metric 4mm OD up to 28mm OD and Imperial 1/8 OD up to 1" OD with British Standard Pipe Thread (BSP) - BSPT or BSPP - or NPT (API).

Wade fittings are manufactured to BS 2051 part 2 and from material to the following standards:

All Imperial compression fittings are delivered complete with nuts and annealed copper rings as standard, for use with copper tube.

All metric compression fittings are delivered with nuts and annealed brass type 'A' rings as standard, for use with copper tube.

Working Pressure for Wade Compression Fittings

The recommended maximum working pressure conforms to BS 2051 part 1for temperatures up to 65°c under vibration free conditions. Please ensure the tube to be used is suitable for the pressure required.

Other Wade Fittings available on request

Push-in fittings and rapid push-over fittings for use with nylon and polyurethane tube, nickel plated to protect against corrosion.

Complete range of brass screwed fittings both plated and unplated. Many options on filters, silencers and restrictors in brass and plastic.